The Curt ATV Towing Starter Kit # C45038 may fit your 2018 Honda FourTrax Rancher though it is not designed as a specific fit for ATVs.
Does your Rancher ATV have a tongue like in the accompanying photo? If so it will simply bolt onto that tongue, which is what would be required for this to fit on your Honda. I took a look at a bunch of photos of this ATV and was unable to determine if it has the tongue but a quick glance at the rear of your ATV and you should be able to tell pretty quickly.
I... view full answer...
Yes, the Reese Towpower 3-Way ATV Hitch with Ball Mount Adapter, # RP7065100, can be used on your Polaris Sportsman ATV with a standard ball mount like the Ball Mount, # AMSC2.
For Ball Mount, # AMSC2, you will need a hitch ball with a 1-inch shank diameter, # 19260 for 1-7/8 inch or # 63845 for 2 inch. view full answer...
Physically, yes, you can use a 1-1/4 inch to 2 inch adapter, like # 80303, in your ATV receiver. But, there are a couple of things you will need to be aware of.
First, you will need to check to make sure that the receiver on the ATV has at least 2 inches of space from the center of the hitch pin hole back away from the receiver opening. If it has a closed back or something in the way and the obstruction is less than 2 inches from the hitch pin hole center, this adapter will not fit.
Second,... view full answer...
ATVs do not have a universal hitch pin size they will require, the size of the hitch pin is actually determined by the trailer hitch that fits.
If you are using something like the Curt ATV Ball Mount Adapter # C45006, for example, you would need the Pin and Clip For Class III, IV and V Trailer Hitch # PC3.
For the most part, if you have a 1-1/4 inch receiver you will used the Pin and Clip For Class I and II Trailer Hitch # PC2 which has a 1/2 inch diameter and if the receiver is 2 inches... view full answer...
Yes, you can absolutely put a trailer hitch ball on the Reese Towpower 3-Way ATV Hitch # RP7065000.
What you need is a trailer hitch ball with a 3/4" diameter shank, and there are a couple options for you, depending on the size of your coupler:
- 1-7/8" Hitch Ball # 19256
- 2" Hitch Ball # C40018
I have added a link to a video review for you to check out as well of the Reese Towpower 3-Way ATV Hitch # RP7065000. view full answer...
The Curt 2" ATV Hitch Ball # C40097 does not come in coarse threads, it is fine threaded. The shank on this hitch ball measures 1-3/4" long and is 5/8" in diameter. It does come with its own nut and lock washer so you can secure it to your ATV's ball mount.
I have added a link to a video review of this hitch ball for you to check out. view full answer...
The Curt ATV Towing Starter Kit # C45038 is designed to work on any ATV that has a tongue area for mounting a hitch ball with a 3/4-inch hole diameter. The receiver portion with the tow strap loop uses an included 3/4-inch bolt to install in that hole. This kit includes the 5/8-inch hitch pin and clip to secure the included ball mount component into the bolt-on receiver part.
This can be used with a tow strap such as the 20-foot # EM59798. view full answer...
I have a solution for you. I reached out to Superwinch, and they confirmed that they stopped producing custom-fit winch plates for ATVs. Unfortunately, they do not carry a specific fit for your 2021 Polaris Sportsman 570 to fit the Superwinch Terra Series ATV Winch - Synthetic Rope # SW1135230 (or any other ATV hitch).
With that information, there are a couple options. You can purchase and customize a compatible winch plate that fits other ATVs like the Superwinch Custom-Fit ATV Winch... view full answer...
The Curt ATV Ball Mount Adapter # C45006 that you referenced would work on a Honda Rancher since it is a universal design like what fits your ATV but we don't have specific info for your Rancher at this time. view full answer...
The problem you probably are facing is that you have to use a Class l ball mount in the hitch receiver on your John Deere ATV. The shank on a Class ll ball mount is inserted in the receiver more than on a 1-1/4 inch receiver and the holes will not line up.
I went to the warehouse and measured the Curt Class l Drawbar, part # C45021. The distance from the end of the shank that goes in the receiver to the center of the hitch pin hole is 1-1/2 inches. This drawbar has a 4-inch rise and measures... view full answer...
If the hitch opening on your ATV is 2 inches by 2 inches the Brophy Stabilizer Clamp and U-Bolt # RSCP that you referenced would fit and work well.
For more information on hitch sizes check out the help article I attached. view full answer...
There is a 3/4 inch ball hole in ATV hitch # RP7065100. The shank of the 2 inch ball will need to be 3/4 inches to fit. If you need a 2 inch ball with a 3/4 inch diameter shank you can use # 19258. The hitch itself mounts to a 5/8 inch diameter tongue hole. If that is what the tractor has now then this set up will work. view full answer...
Yes, Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs # MR54FR will fit your 2019 Honda Ridgeline. It simply attaches to your 2" trailer hitch receiver and allows for safe loading of an ATV, UTV/side by side, or golf cart. The max wheel base is 88", the max width is 60", and the weight capacity is 1,400lbs. I attached a demonstration video for you to check out. view full answer...
Thank you for the photo!
Pretty much all of our extenders have 4" or less for that clearance you're looking for except for the 18" Long Draw-Tite Hitch Extender for 2" Hitch Receivers # HE18. This is a bit longer than the 8" extension piece you were looking at but this is the only option that meets the specs you're needing.
If you'd like to add an anti-rattle and locking hitch pin I recommend checking out the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 which has both... view full answer...
The Curt ATV Towing Starter Kit # C45038 receiver portion is open at the back and with the ball mount that comes with it the measurement from the center of the hitch pin hole to the back of the shank is 2-1/2 inches. This is a pretty standard distance for ball mounts. I have included a picture showing where this measurement is taken. If your ball mount has the same distance or less then it will work. view full answer...
The Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter part # RP7065100 should fit a 2013 Honda Rancher TRX so long as it has a 5/8" diameter hitch ball hole. The Reese Towpower 3-Way ATV Hitch will work to extend the connection point for towing so you don't hit your tires. The hitch mount adapter comes with a serrated washer and lock nut to hold it in place and stop it from pivoting with the trailer but there won't be much side to side force on the adapter to cause this anyhow.
I am... view full answer...
Although the Draw-Tite, # 36416, and Hidden Hitch, # 90152 (no longer available), trailer hitch receivers have a 300 lb tongue weight capacity and a 3500 lb towing capacity which would be sufficient for a trailer carrying 750 lbs, you are going to be limited by the capacity of your 2008 Toyota Camry LE.
Since the Camry is designed primary as a passenger carrying vehicle, Toyota doesn't provide a specific towing capacity. In this case you'll just need to make sure that the load of the... view full answer...
Yes, the Superwinch LT3000ATV Winch, # SW1130220, will fit the Bulldog Winch Custom-Fit Steel Winch Mount for Kawasaki Mule, # BDW15184.
Both the Bulldog mounting brackets and Superwinch LT3000 winch will mount to your 2015 Kawasaki Mule Pro-FXT. view full answer...
Your 2017 Prime Time Crusader Lite 28RL trailer according to the manufacturer was not designed to accommodate the addition of a hitch to the rear bumper or frame. So they will not warranty the addition of the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 or the addition of a hitch like # C13701.
You will need to weigh the risk when desiring to tow as most 5th wheel trailers and these hitch options would allow for that utility trailer with ATV towing or small aluminum boat. The hitches... view full answer...
Go To Results